Mercedes Benz Air Suspension Strut Assembly Auto Parts Struts Shock
Absorbers 2123203438
Quick Detail
| Description | Brand New Mercedes Benz front Air Suspension E-Class W212 CLS-Class
W218 4 Matic |
| Model | Mercedes Benz E-Class W212 CLS-Class W218 |
| OEM | 2113203338 2113203438 2123201938 212320193880 212320333880
2123202038 212320203880 212320343880 |
| Condition | Brand New |
| Fitting Position | front Left and Right |
| Material | Rubber |
| Application | Mercedes-Benz W212 E300 E350 E400 E500 with 4Matic |
| Warranty | 12 months |
| Delivery | 3-7 days after receiving payment |
| Gross Weight | 7.5KG |
Product Specification:
Car Model:
Mercedes E-CLASS T-Model (S212) 08.2009-12.2016
E 220 BlueTEC 4-matic (212.211) 12.2014-12.2016
E 250 CDI / BlueTEC 4-matic (212.282, 212.297) 07.2010-12.2016
E 300 4-matic (212.280) 07.2011-12.2016
E 350 4-matic (212.287, 212.288) 11.2009-12.2016
E 350 CDI 4-matic (212.289, 212.293) 11.2009-12.2013
E 350 BlueTEC 4-matic (212.294) 07.2014-12.2016
E 400 4-matic (212.267, 212.299) 01.2013-12.2016
E 500 4-matic (212.291) 09.2011-12.2016
E 63 AMG 4-matic (212.276, 212.292) 02.2011-12.2016.
Original spare part number:
A2123203438, A212320343880, A2123202038, 2123203438, 212320343880,
2123202038
A2123203338, A212320333880, A2123201938, 2123203338, 212320333880,
2123201938
Performance:
1. Ensuring the steering and braking functions of the vehicle and
improving the safety of the vehicle.
2. To prevent the heavy vehicles from damaging other parts.
3. The off-road performance of the vehicle can be improved even in
extreme weather, and the noise is low, the friction is small, and
the service life is long.
Why do you need an sir suspension shock and it's advantages.
1. Every time you add or take away weight to a vehicle, speed up or
slow down, or turn left or right, this challenges what the shock
absorbers and springs are capable of. Traditional stock shocks and
springs are designed and installed with only a fixed set of
situations in mind.
2. Air suspension systems essentially replace a vehicle's coil
springs with air springs. The air springs are simply tough rubber
and plastic bags inflated to a certain pressure and height to mimic
the coil springs. But the similarities end there. By adding in an
on-board air compressor, sensors and electronic controls, today's
air suspension systems provide several advantages over all-metal,
conventional springs, including near-instant tuning, and the
ability to adapt handling to different situations and vary load
capability.
3. Whether the system is manual or electronic, or installed by a
weekend mechanic or a seasoned tech, air suspension can lower a car
to improve its street cred, even out a heavy payload, or simply
improve the ride of a vintage Detroit metal street monster.
We possess:
1. Long experience in air suspension industry;
2. Strong and reliable factory with stable supply capacity;
3. Various air suspension products, covering many car models;
4. Continuous new products development;
5. Professional sales team for every customer.
If you want long-term cooperation, you can also contact us to get
our latest product catalogue and more information.
Product Introdution:
As a starting point, it is important to discuss what is air
suspension and how does it differ from traditional suspension
systems? The main difference between a traditional shock or strut
is that they have a dampening mechanism set to a certain ride
control feel while an air suspension system uses an air compressor
in combination with air struts and suspension air bags to control
the feel of the ride.
Air suspension has several advantages over traditional shocks and
struts. The first is that the ride quality is often controlled by
the driver of the vehicle. Therefore, if you want a softer ride you
can set your air suspension system to deliver that and vice versa
if you are looking for a stiffer, rougher ride. The second
advantage is that you can control ride height, some systems are
advanced in that they automatically control this for you. The final
advantage of an air suspension system is weight management. If you
load the back of your SUV with a large amount of groceries from the
store, the air suspension system either automatically adjusts to
handle it or you can manually adjust it. For traditional shocks and
struts the level of rebound is set and therefore no matter what the
weight of your load is, you have to stick with it. This often
creates a sagging rear end when carrying a heavy load.
While an air suspension system is more complex, the advantages are
clear. The system is comprised of a central air suspension
compressor as well as air struts within an air bag at each wheel.
The air compressor pressurised the air struts as needed to control
the feel. Other components can be seen in the diagram above, all of
which are mainly air lines to transfer pressure and driers (filter)
to complete the system.
If your ride feels a little bouncy or you can feel clunks in the
suspension while it's going over bumps it is likely due to worn
strut assemblies and shock absorbers. The purpose of the strut
assembly is it acts as a central pivot point for the front
suspension while housing the coil spring. It also dampens the
compression and rebound of the coil spring as the suspension moves
up and down. When replacing suspension components it is highly
recommended to replace them in pairs.
Suspension Strut Assembly Failure Symptoms
- Noise from rear end over bumps
- Abnormal tire wear
- Vehicle wandering while driving
- Poor Steering response
- Poor Handling
- Harsh ride
FAQ
| 1. Are You Manufacturer Or Trading Company? |
| Re: We Are Both Specialize In Auto Parts ( Air Suspension)
Manufacturer & Trading Company. |
| 2. What's The MOQ? |
| Re: The MOQ With Our Standard Products Is 1 Piece. |
| 3. What's Your Mainly Products? |
| Re: We Supply Air Suspension Spring, Shock Absorber, Pressure
Shocks, Air Pump etc. |
| 4. What's Your Policy On Warranty? |
| Re: We Provide 12 Months For New Suspension Parts Products For Our
Customers. |
| 5. Where Is Your Company? |
Re: Our Trade Office In Baiyun District ,Guangzhou; Our Factory
Located At Shunde District Foshan City. We Warmly Welcome You To Visit With Us Anytime, More Details & Info
Please Contact Us |
| 6. What Are Your Payment Methods? |
| Re: We Accept T/T, Paypal, Western Union, Money Gram, Alipay. Due
To Difference Payment In Difference Countries Or Regions. |
| 7. What's Your Packing Way? |
| Re: Neutral Packing, Standard Packing, Accept Customers' Special
Required. |
| 8. How Do You Usually Ship The Goods And When? |
| Re: Normally, We Will Ship The Goods In 3-7 Days After Payment
Verified And Goods Confirmed, And Ship The Goods Via The (HuangPu)
Ports In GuangZhou. |
| 9. If You Offer The Free Sample? |
| Re: We Accept MOQ 1 Piece Order, But Do Not Offer The Free Sample
To Our Customers. |
Advantage
1. we are top 3 of professional air suspension manufacturer in
China.
2. our factory has 120 staff, and we only produce 100% newly air
suspension products for 10 years.
3. we have cooperated with 80 overseas companies with stable
relationships. many are also brands or big sellers at Amazon or
EBAY websites.
4. we have our own cars to test our products,except normal test
machine and IATF16949:2016 certificate standard.
5. we have complete production line, Mercedes Benz,BMW
Audi,Porsche,Land Rover,Volkswagen-these are our products,we has
complete products line.
6. Our air suspension/air compressor/air strut/air suspension parts
100% NEWLY manufactured to instead OEM
7. We manufacture air suspension/air strut/air compressor to
instead OEM ;
8. Constant temperature workshop for core parts;
9. Japan automatic welding machine to weld.
Important:
-Never lower vehicle with air Discharged from air-suspension
bellows!
-Check air suspension system for leaks.
-Lower vehicle with pressurized air spring modules from the lifting
platform.
Verify after repair if the system is completely sealed.
The easiest way this is by parking the vehicle determine. Wait for
the automatic readjustment of the system, if your vehicle has this
feature. All heights the air are supported accurately measure from
the ground to the lower edge of fenders and note. The next day,
check and compare these heights.
Even a small deviation of the distances leads to permanent damage
to the compressor and the valves.
OEM/ODM Service:
- If you want to show your own brand LOGO on the goods such as
cable, package bag, label or any where. Our OEM and ODM service is
always ready to do it. Please contact with our sales team to get
best support.
Packing:
- According to Standard Export Packing.
- Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou
